महाराष्ट्र अभियंता सेवा (स्थापत्य) पूर्व परीक्षा २०१५

In traffic design, PCU means :

On a right angled road intersection with two-way traffic, the total number of conflict points are :

Compared to a level road, on a descending grade the stopping sight distance is :

'Stop' sign is a :

Which of the following shapes is preferred in valley curve ?

Map is a graphical representation of the features on small scale as projected on a :

If N is number of sides of a closed traverse, then the sum of included angles should be :

The tension at which the effect of pull is neutralised by the effect of sag is known as :

A chain of nominal length 30m is found to be 0.30m too long. If the area of the field measured with this defective chain is 300 hectares, the correct area of the field is :

The R.L. of the ground level is 100m. The levelling staff reading on the ground surface is 1.355m. The staff reading 2.355m is recorded when the levelling staff is held inverted touching its bottom to the base of chajja. The height of chajja from the ground will be:

is the deflection angle, then tangent length of If R is the radius of the circular curve and the curve is given by :

Precision represents repeatability of a measurement and is concerned with only :

Terpentine Oil is used in paints as a : 

The four essential constituents of ordinary portland cement are in order of decreasing proportions :

Assertion (A): National building code of India recommends a minimum frontage of 6m on any road.
 Reasoning (R₁): It prevents the formation of blind corners at the intersection of the streets and prevents accidents.
Reasoning (R₂): It prevents the building from dust and noise of the street.
Which of the following statements is correct?

Quantities of wood work are computed generally in terms of : 

The average water absorption as an acceptance criteria for bricks higher than class 12.5 shall be limited to:

Final setting time of Ordinary Portland cement is not more than :

The durability and gloss of a paint is :

What is the ideal termperature for the promotion of alkali aggregate reaction ?