महाराष्ट्र अभियंता सेवा (स्थापत्य) गट अ २०१३ पूर्व परीक्षा

Match List - I (giving method of estimation of pile capacity) with List - II (parameters to be estimated),

Match List - I (type of foundation) with List - II (use of the foundation) select correct answer, using the codes given below :

Match List - I with List - II and select the correct answer using codes given below :

If correct value of cohesion of highly soft clay is to be determined choose the correct type of test that should be carried :

Match the following:

Match the following:

If back fill of a smooth backward vertical wall 6 m high carries a uniformly distributed load of 60 kN/m² and back fill soil has =30°, the active earth pressure due to uniform surcharge is :

Match the following:

Yield of a drainage basin is generally expressed as:
(a) Total volume of water flowing per year

(b) Total volume of water stored in a day

(c) Total volume of water flowing per day

(d) Discharge in a day

Which of the above given statement, is/are correct ?

Hagen - Poiseuille equation for laminar flow in the circular pipes is given as :

Which of the above given statements is correct?

A streamline is a line :

The double mass curve technique is used for :
(a) Determination of average annual rainfall

(b) Determination of cumulative rainfall

(c) Checking the inconsistency of a record of rainfall data

(d) Measurement of effective rainfall

Which of the above given statements is/are correct ?

Match the following:

As per Lacey's theory, the silt factor is :

When the pipes are connected in parallel, the total loss of head ?

According to Lacey, the bed slope 'S' for a regime channel is given by : 

Levees are constructed :

If the R.L.S of canal bed level and high flood level of drainage are 212.0 m and 210.0 m respectively, then cross drainage work will be _______.

What is a drag force a function of ?
(a) Projected area of the body

(b) Mass density of the fluid

(c) Velocity of the body

The correct answer is.

The maximum elevation to which the water surface will rise in the reservoir during design flood is known as :

(a) Full reservoir level

(b) Maximum water level

(c) Normal pool level

(d) Full tank level

Which of the above given statements is/are correct?